Explorer 4WD V6-4.0L (2009)
Fluid - Transfer Case: Service and Repair
Transfer Case Draining and Filling
1. NOTICE: Transfer case failure can result if the correct fill procedures are not followed.
NOTE: Position a suitable drain pan under the transfer case.
Remove the drain plug and drain the fluid.
2. Clean and install the drain plug.
-
Tighten to 20 Nm (177 lb-in).
3. NOTICE: Incorrect fluid fill can result in transfer case failure.
NOTE: Fill the transfer case with the vehicle on a level surface. Make sure the fluid is level with the filler opening for the correct fluid level.
Clean the area around the fill plug. Remove the fill plug. Using a suitable oil suction gun, fill the transfer case to the correct level with the
specified fluid.