Explorer 4WD V6-4.0L (2009)
GO to Q38.
-------------------------------------------------
Q38 VERIFY VEHICLE EQUIPMENT - PRB MODULE
-
Inspect the vehicle for a PRB module.
-
Is the vehicle equipped with a PRB module?
Yes
GO to Q39.
No
GO to Q40.
-------------------------------------------------
Q39 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE PRB MODULE DISCONNECTED
-
Disconnect: PRB Module C4322b.
-
Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and ground; and between the DLC C251-11, circuit
VDB07 (VT/OG), harness side and ground.
-
Are the resistances greater than 1,000 ohms?
Yes
CONNECT the negative battery cable. GO to Q51.
No
GO to Q40.
-------------------------------------------------
Q40 VERIFY VEHICLE EQUIPMENT - PAM
-
Inspect the vehicle for a PAM.
-
Is the vehicle equipped with a PAM?
Yes
GO to Q41.
No
GO to Q42.
-------------------------------------------------
Q41 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE PAM DISCONNECTED
-
Disconnect: PAM C4014 (Mountaineer), C3267 (Explorer Sport Trac) or C4226 (Explorer).
-
Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and ground; and between the DLC C251-11, circuit
VDB07 (VT/OG), harness side and ground.