Explorer 4WD V6-4.0L (2009)
-
Are the resistances greater than 1,000 ohms?
Yes
CONNECT the negative battery cable. GO to Q52.
No
GO to Q42.
-------------------------------------------------
Q42 VERIFY VEHICLE EQUIPMENT - APIM
-
Inspect the vehicle for an APIM.
-
Is the vehicle equipped with an APIM?
Yes
GO to Q43.
No
GO to Q44.
-------------------------------------------------
Q43 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE APIM DISCONNECTED
-
Disconnect: APIM C3342.
-
Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and ground; and between the DLC C251-11, circuit
VDB07 (VT/OG), harness side and ground.
-
Are the resistances greater than 1,000 ohms?
Yes
CONNECT the negative battery cable. GO to Q53.
No
GO to Q44.
-------------------------------------------------
Q44 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE SJB DISCONNECTED
-
Disconnect: SJB C2280d.
-
Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and ground; and between the DLC C251-11, circuit
VDB07 (VT/OG), harness side and ground.
-
Are the resistances greater than 1,000 ohms?
Yes
CONNECT the negative battery cable. GO to Q54.