Explorer 4WD V6-4.0L (2009)
possible causes of the circuit short. REPEAT the network test with the scan tool.
-------------------------------------------------
U3 CHECK THE DLC GROUND CIRCUITS FOR AN OPEN
-
Disconnect: Negative Battery Cable.
-
Measure the resistance between the DLC C251-5, circuit GD138 (BK/WH), harness side and ground; and between the DLC C251-4, circuit
GD138 (BK/WH), harness side and ground.
-
Are the resistances less than 5 ohms?
Yes
REPAIR the scan tool. CONNECT the negative battery cable. REPEAT the network test with the scan tool.
No
REPAIR the circuit in question. CONNECT the negative battery cable. REPEAT the network test with the scan tool.
-------------------------------------------------