Explorer 4WD V6-4.0L (2009)
6. Using the scan tool, verify that the Transmission Fluid Temperature (TFT) is between 80°C-85°C (175°F-185°F). Do not overfill the transmission.
The transmission fluid level must be at the upper level of the crosshatch mark.
7. NOTE: If the transmission fluid is not at the correct level, follow the steps for Adding Additional Transmission Fluid or Removing Transmission
Fluid. For additional information, refer to Transmission Fluid Drain and Refill See: Service and Repair/Procedures/6R80/Transmission Fluid
Drain and Refill.
Install the transmission fluid fill plug.
-
Tighten to 35 Nm (26 lb-ft).
