Explorer 4WD V6-4.0L (2009)
filter greater than 60 degrees. Doing so can block transmission fluid flow and cause internal transmission damage.
Install the one end of the transmission fluid filter into the transmission fluid cooler hose with a clamp.
-
Tighten the transmission fluid cooler hose clamp.
8. Using a suitable length of hose, install the other end of the transmission fluid filter into the tubing ferrule hose assembly with 2 clamps.
-
Tighten the hose clamps.
9. Clean a section of the transmission fluid pan, then install the sticker.
10. Fill the transmission with transmission fluid.
-
Verify for correct operation.
-
Check the filter for leaks.