Explorer 4WD V6-4.0L (2009)
2. Using the Valve Body Aligners, install the main control valve body and loosely install the main control valve body-to-case screws.
1. Install the short main control valve body-to-case screw.
2. Install the main control valve body-to-case screw with the larger head.
3. Install the remaining main control valve body-to-case screws.
3. Remove the Valve Body Aligners and loosely install the main control valve body screw.
4. Tighten the main control valve body screws in the sequence shown.
-
Tighten to 10 Nm (89 lb-in).
5. Install the manual control valve detent spring screw.
-
Tighten to 10 Nm (89 lb-in).
