Explorer 4WD V6-4.0L (2009)
8. Remove the side bolt.
-
To install, tighten to 5 Nm (44 lb-in).
9. Remove the bolt.
-
To install, tighten to 5 Nm (44 lb-in).
10. Remove the windshield washer pump reservoir.
11. NOTICE: When servicing the windshield washer pump, be careful not to damage the windshield washer pump seal.
Transfer components as necessary.
12. NOTICE: Do not operate the washer pump prior to filling the windshield washer reservoir. Failure to follow these instructions may
result in premature pump failure.
To install, reverse the removal procedure.
