Explorer 4WD V6-4.0L VIN E (1999)
6. Remove the seat cushion flex mats.
1. Unhook the rear flex mat J-clips.
2. Unhook the front flex mat J-clips.
3. Remove the seat cushion flex mats.
NOTE: Use the brackets on the seat cushion frame to obtain the necessary leverage to unhook the rear flex mat J-clip.
ASSEMBLY
1. Install the seat cushion flex mats.
1. Position the seat cushion flex mats.
2. Hook the front flex mat J-clips.
3. Hook the rear flex mat J-clips.
CAUTION: The flex mat J-clips must be installed with the openings facing down or the seat cushion foam will be damaged.
NOTE: Use the brackets on the seat cushion frame to obtain the necessary leverage to hook the rear flex mat clip.
2. Position the seat cushion trim cover on the seat cushion hook and loop strips.