Explorer 4WD V6-4.0L VIN E (1999)
4. Remove the seat cushion frame from the seat cushion foam.
1. Unhook the seat cushion trim cover J-clips.
2. Remove the seat cushion frame from the seat cushion foam.
5. Invert the seat cushion trim cover.
6. Remove and discard the hog rings.
1. Fold back the seat cushion trim cover to expose the hog rings.
2. Remove and discard the hog rings.
NOTE: The hog rings along the front of the seat are shown, the hog rings along either side are similar.
7. If equipped, and if necessary, remove the seat cushion heating element from the seat cushion foam.
CAUTION: Any time the seat cushion heating element is removed from the seat cushion foam, the foam must be replaced.