Explorer 4WD V6-4.0L VIN E (1999)
16. Disconnect the seat backrest recliners from the seat backrest recliner actuator.
1. Disconnect the seat backrest recliner actuator cable housings from the seat backrest recliners.
2. Unhook the seat backrest recliner actuator cables from the seat backrest recliners.
ASSEMBLY
1. Connect the seat backrest recliners to the seat backrest recliner actuator.
1. Hook the seat backrest recliner actuator cables to the seat backrest recliners.
2. Connect the seat backrest recliner actuator cable housings to the seat backrest recliners.
2. Install the seat backrest recliner roll pins.
3. Install the lumbar support adjusting pump.
1. Position the lumbar support adjusting pump.
2. Install the bolt.