Explorer 4WD V6-4.0L VIN E (1999)
Brake Caliper: Service and Repair
Front
Anchor Plate
Removal
1. NOTE: AWD and 4x4 shown, 4x2 similar.
Remove the pads.
2. Remove the front disc brake caliper anchor plate.
1
Remove the two front disc brake caliper anchor plate bolts.
2
Remove the front disc brake caliper anchor plate.
Installation
1. Install the front disc brake caliper anchor plate.
1
Position the front disc brake caliper anchor plate.
2
Install the front disc brake caliper anchor plate bolts.
2. Install the pads.
Disassembly and Assembly
Disassembly
1. Remove the disc brake caliper.
2. Drain remaining brake fluid from the disc brake caliper.
3. Secure the disc brake caliper in a vise.