Explorer 4WD V6-4.0L VIN E (1999)
Antenna, Phone: Service and Repair
REMOVAL
CAUTION: To avoid damage to the glass, do not pry the vehicle portable cellular phone antenna base when removing.
1. Disconnect the portable cellular phone antenna base cable.
2. Cut the two-way tape holding the portable cellular phone antenna base to the glass and remove the base.
INSTALLATION
NOTE:
-
Before applying new two-way tape to install the portable cellular phone antenna base, use a suitable cleaner to thoroughly clean the glass.
-
Inside and outside portable cellular phone antenna bases must be carefully and accurately aligned.
1. To install, reverse the removal procedure.
