Explorer 4WD V6-4.0L VIN E (1999)
Cruise Control Servo Cable: Adjustments
1. Remove the speed control actuator cable clip.
2. Adjust the speed control actuator cable.
1
Make sure the throttle body cam is in the closed position.
2
Pull on the speed control actuator cable to remove any slack.
3
Back off the speed control actuator cable one notch.
NOTE:
-
The speed control actuator cable must not be pulled tight for proper operation.
-
The throttle body cam will automatically spring set to the closed position. The throttle body cam must be in the closed position.
3. Install the speed control actuator cable clip.
1
Hold the speed control actuator cable.
2
Insert the speed control actuator clip securely.
