Explorer 4WD V6-4.0L VIN E (1999)
Muffler: Service and Repair
Removal
1. Remove the two bolts and loosen the clamp.
2. Disconnect the RH torsion bar link.
^
Remove the nut and position the torsion bar link out of the way.
3. Pry the rear support slide out of the rubber insulator.
4. Pry the double support slides away from the insulators.
5. Remove the muffler. Slide the muffler forward over the rear axle while twisting the muffler until the muffler is removed.
Installation
