Explorer 4WD V6-4.0L VIN E (1999)
Function Selector Switch: Service and Repair
Control Assembly, HVAC
Bulbs
REMOVAL
1. Remove the climate control assembly.
2. Turn and pull the lamp socket.
^
Install a new the bulb in the socket.
INSTALLATION
1. To install, reverse the removal procedure.
Climate Control Switches
REMOVAL
1. Remove the climate control assembly.
2. Remove the heater blower motor switch.
1
Remove the screw.
2
Rotate and remove the heater blower motor switch.
NOTE: The knob will come off when the switch is removed.
3. Remove the temperature control switch and the A/C damper door switch.
1
Remove the screw.
2
Rotate and remove the temperature control switch.
3
Rotate and remove the A/C damper door switch.
