Explorer 4WD V6-4.0L VIN E (1999)
10. Check for fused spot deposits, identified by melted or spotty deposits resembling bubbles blisters caused by sudden acceleration.
^
Clean the spark plug.
11. Adjust the spark plug gap.
INSTALLATION
NOTE
^
If an original spark plug is reused, make sure it is placed in the same cylinder it was taken from. Replacement spark plugs can be used in any
cylinder.
^
Apply Silicone Brake Caliper Grease and Dielectric Compound D7AZ-19A331-A or equivalent meeting Ford specification ESE-M1C171A to the
inside of the spark plug boot of the spark plug wire.
1. Install the RH spark plugs.
2. Connect the RH spark plug wires.