Explorer 4WD V6-4.0L VIN E (1999)
1. Install the side air bag wiring harness.
^
Connect the pin-type retainer to the seat backrest frame.
NOTE: The seat backrest components other than the seat backrest frame and side air bag wiring harness have been omitted for clarity.
2. Connect the side air bag module electrical connector.
1. Install the connector to the side air bag module.
2. Slide the side air bag module electrical connector locking clip to secure the connector to the side air bag module.
3. Make sure the electrical connector is securely fastened to the side air bag module.
4. Install the side air bag module onto the front seat back frame mounting bracket.
1. Position the side airbag module on to the front seat back frame mounting bracket being sure the side air bag wiring harness is located behind
the seat bracket.
2. Install the side air bag module retaining nut.