Explorer 4WD V6-4.0L VIN E (1999)
10. Zip the air bag deployment chute completely closed, then position the zipper tails at the top and bottom of the deployment chute, into the seat back
opening.
^
The side air bag deployment chute between the seat back pad and the side air bag module from the inboard side of the seat back.
^
Align the side air bag deployment chute to the side air bag module, making sure it covers the length of the side air bag module.
NOTE: Be sure the side air bag deployment chute is properly positioned, before proceeding to step 9.
11. Install the hog rings.
12. Unroll the seat backrest trim cover to the bottom row of hog rings.
13. Install the hog rings.
14. Connect the hook and loop fastener to the seat backrest trim cover.
1. Pull the seat backrest trim cover completely down.
2. Reach up inside the seat backrest and grab the plastic above the hook and loop. Remove enough plastic to expose the hook and loop.
