Explorer 4WD V6-4.0L VIN E (1999)
9. Remove the ignition switch lock cylinder.
1
Position the ignition switch lock cylinder to the RUN position.
2
Using the suitable tool, push upward on the cylinder release tab while pulling the ignition switch lock cylinder outward.
10. Remove the upper steering column shroud.
11. Remove the Passive Anti-theft System (PATS) transmitter.
1
Remove the PATS transmitter retaining screw.
2
Position the PATS transmitter out of the way.
12. Remove the key-in-ignition warning indicator switch.
