Explorer 4WD V6-4.0L VIN E (1999)
8. Remove the intermediate band locknut and unscrew the screw.
-
Discard the intermediate band locknut after removal.
9. CAUTION: Servo cover is under spring tension. Use caution when removing.
Using Servo Cover Compressor, remove the intermediate band servo cover retaining ring.
1
Install the Servo Cover Compressor and compress the intermediate band servo cover.
2
Remove the intermediate servo cover retaining ring.
-
Slowly remove tension on the J hook nut and remove the servo cover compressor.
10. CAUTION: Servo removal tool should be used to prevent damage to the servo, servo cover, and bore.
Use Servo Removal Tool to remove the intermediate band servo cover, intermediate band servo piston and servo piston spring.
-
Insert Servo Removal Tool into the transmission case, and remove servo cover, intermediate band servo piston and servo piston spring.
Installation
