Explorer 4WD V6-4.0L VIN E (1999)
6. Clean and inspect the transmission fluid pan and magnet. Clean all mating surfaces.
7. Flush the transmission fluid cooler and transmission fluid cooler lines. For additional information, refer to Transmission Fluid Cooler -
Backflushing and Cleaning.
Installation
1. CAUTION: Lubricate fluid filter O-rings with MERCON V Automatic Transmission Fluid XT-5-QM or equivalent meeting MERCON
V specification or they may be damaged.
Lube and install new O-rings onto the transmission fluid filter. Install a new transmission fluid filter.
-
Position transmission fluid filter on the main control valve body.
2. CAUTION: Make sure wire harness is not pinched under filter.
Install transmission fluid filter screw.
3. Position the oil pan magnet in the transmission fluid pan.
