Explorer 4WD V6-4.0L VIN E (1999)
5. CAUTION: Do not bend the manual valve inner lever pin.
Install the manual valve inner lever nut.
6. CAUTION: Park pawl actuating rod must be properly installed into parking pawl and guide cup located in extension housing. Verify
park linkage function.
Verify that the output shaft is locked in the PARK position.
7. Install the manual valve detent spring.
8. Install the transmission fluid pan with a new pan gasket.
9. Install the digital Transmission Range (TR) sensor.
10. Lower the vehicle.
11. Connect the battery ground cable.
12. Fill the transmission to proper fluid level and check for proper transmission operation.
-
Use MERCON V Automatic Transmission Fluid XT-5-QM or equivalent meeting MERCON V specification.
