Explorer 4WD V6-4.0L VIN E (1999)
Remove the differential assembly from the differential housing.
1. Position the wood blocks.
2. Push downward on the pry bars.
3. Remove the differential assembly.
4. Remove the special tool.
15. Measure the pinion bearing preload.
-
Using a Nm (pound-inch) torque wrench, measure the torque required to maintain pinion rotation. Record the measurement.
16. Index-mark the pinion flange and the pinion stem.
17. Use the special tool to hold the flange while removing the nut.
18. Using the special tool, remove the pinion flange.
