Explorer 4WD V6-4.0L VIN E (1999)
31. Remove the differential case from the differential housing. Remove the special tool from the differential case hubs.
32. Complete the worksheet, and select the appropriate thickness differential shims. New differential shims are available in 0.0762 mm (0.003 in),
0.127 mm (0.005 in), 0.254 mm (0.010 in), and 0.762 mm (0.030 in) thickness.
33. Install the differential shims and the differential bearing.
1. Position the differential shims and the differential bearing.
2. Using a suitable press, install the differential bearing.
-
Repeat this step for opposite side of the differential case.
34. Install the special tools.
