Explorer 4WD V6-4.0L VIN E (1999)
2. Position the tube bushing removal tools.
1
Position the Bushing Remover/Replacer Cup.
2
Position the Drawbolt.
3
Thread the Bushing Remover Adapter on the Drawbolt.
3. Tighten the Drawbolt to remove the tube bushing.
Installation
1. NOTE: Axle tube bushing installation shown, axle housing bushing is a similar procedure.
Position the tube bushing and the tube bushing installation tools.
1
Position the tube bushing.
2
Position the Gauge Ring.
3
Position the Bushing Replacer Collet.
4
Position the Bushing Remover/Replacer Cup.
5
Position the Drawbolt.
6
Thread the Bushing Replacer Adapter on the Drawbolt.
