Explorer 4WD V6-4.0L VIN E (1999)
Windshield Washer Hose: Service and Repair
1. Locate and verify the leaking washer hose.
2. Cut the hose cleanly and remove the damaged portion of the washer hose.
3. Install a windshield washer hose adapter between the cut ends of the hose.
4. Install a segment of 6.4 mm (0.25 in) i.d. black rubber hose N809610-S or equivalent over the ends of the washer hose, and clamp both ends of
the rubber hose using spring clamps 389252-S101 or equivalent.
NOTE: In difficult cases, clamping may be required.