Explorer 4WD V8-302 5.0L VIN P SFI (2000)
1. Install the DSM.
1
Connect the electrical connectors.
2
Position the DSM.
3
Install the screws.
2. Install the seat track. For additional information, refer to Seat-Track, Limited and 6-Way Power.
NOTE: Be sure to read and follow all air bag warnings contained in Seat-Track, Limited and 6-Way Power, Removal and Installation.
3. Reactivate the supplemental restraint system. For additional information, refer to Air Bag Systems.
WARNING: THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
THE VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.
4. Prove out the air bag system. For additional information, refer to Air Bag Systems.
5. Check the restraint system for proper operation.
