Explorer 4WD V8-302 5.0L VIN P SFI (2000)
Front Steering Knuckle: Service and Repair
Special Service Tool(s)
Removal
1. Remove the wheel hub.
2. Remove the torsion bar cover plate.
1
Remove the retaining bolts.
2
Remove the torsion bar cover plate.
3. Note: Before relieving the torsion bar tensions, measure and record the measurement of the torsion bar adjustment bolt. This measurement will be
used as the preset depth for the new torsion bar adjustment bolt during installation.
Measure and record the length where indicated.