Explorer 4WD V8-4.6L (2008)
Trailer Hitch: Service and Repair
Trailer Hitch
Material
Removal and Installation
NOTE: The factory rear trailer hitch crossmember is welded to the frame. The service replacement rear trailer hitch crossmember will be bolted to the
frame.
All vehicles
1. Remove the spare tire.
2. Remove the rear bumper cover.
3. Disconnect the trailer wiring harness.
Explorer/Mountaineer
4. Cut the rear rails vertically at least 10-18 mm (0.39-0.70 in) behind the rear body/box mount leg.
-
Use Explorer/Mountaineer template No. 1.
