Explorer 4WD V8-4.6L (2008)
Third Row Seat Cushion (Part 2)
Removal and Installation
1. Remove the third row seat from the vehicle.
2. Release the cushion trim cover retainers attached to the bottom of the cushion frame.
3. CAUTION: Use care when separating the seat back trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn
from the backrest foam pad.
Invert the cushion trim cover, release the hook-and-loop strips and separate the cushion trim cover from the cushion foam pad.
4. To install, reverse the removal procedure.
