Explorer 4WD V8-4.6L (2008)
11. Install the outboard recliner inner cover.
12. NOTE: The outboard recliner inner cover has been removed for clarity.
Position the outboard recliner release pivot stub into the recliner shaft and install the 2 outboard recliner-to-cushion frame bolts.
-
Tighten to 55 Nm (41 lb-ft).
13. Install the outboard recliner short cable to the latch feet assembly outboard foot and attach all cable casing retainers.
14. Install the outboard recliner long cable to the kneeling mechanism inboard leg and attach all cable casing retainers.