Explorer 4WD V8-4.6L (2008)
5. Remove the heater tube bracket nut.
6. Remove the dash panel A/C line bracket nut.
-
To install, tighten to 11 Nm (8 lb-ft).
7. Disconnect the 2 heater hose clamps at the heater core.
8. Disconnect the evaporator inlet fitting.
-
Discard the O-ring seals.
9. Disconnect the evaporator outlet fitting.
-
Discard the O-ring seals.
10. Disconnect the 2 vacuum connectors.