Explorer 4WD V8-4.6L (2008)
Wheel Fastener: Service and Repair
Front
Wheel Studs
Removal
1. Remove the wheel and tire.
2. CAUTION: Do not allow the caliper and anchor plate assembly to hang from the brake hose or damage to the hose can occur.
Remove the bolts and position the caliper, pads and anchor plate assembly aside.
^
Support the caliper and anchor plate assembly using mechanic's wire.
^
To install, tighten to 165 Nm (122 lb-ft).
3. Remove the brake disc.
4. Using the special tool, remove the wheel stud.
