Explorer 4WD V8-4.6L (2008)
5. Separate the quick connect coupling.
Connect - Type I
1. Inspect the quick connect coupling and the tube for damage. Remove any dirt or obstructions.
2. NOTE:
-
Make sure the fuel tube clicks into place when installing the tube. To make sure that the fuel tube is fully seated, pull on the tube.
-
Lubricate the quick connect coupling with clean engine oil.
Connect the quick connect coupling.
3. Push the clip up into the quick connect coupling. Pull on the tube to make sure it is seated correctly.
4. Clip the locking tab in place.
