Explorer 4WD V8-4.6L (2008)
After any crash that results in deployment of the driver and/or front outboard passenger safety belt pretensioners, new driver and/or front outboard
passenger safety belt systems (including retractors, buckles and height adjusters) must be installed. Failure to install new safety belt systems increases the
risk of serious personal injury or death in a crash.
NOTE: Power seat shown, manual seat similar.
1. Remove the RH third row seat.
2. Remove the nut and dual safety belt buckle assembly.
-
To install, tighten to 75 Nm (55 lb-ft).
3. To install, reverse the removal procedure.
4. Check the active restraint system for correct operation.
