Explorer 4WD V8-4.6L (2008)
10. Unlock the lock tab and disconnect the selector lever cable end from the manual control lever.
11. Disconnect the selector lever cable from the bracket and remove the selector lever cable.
Installation
Vehicles equipped with a 6R60 transmission
NOTE: When installing the selector lever cable, make sure that the selector lever cable locking tabs are locked in place and the selector lever cable
end is snapped onto the ball stud. Press the selector lever cable into the selector lever cable bracket and listen for the selector lever cable to click in
place. Pull back on the selector lever cable to make sure that it is locked into the selector lever cable bracket. Also make sure that the selector lever
cable end is correctly installed onto the ball stud. Pull back on the selector lever cable end to make sure that the selector lever cable end is correctly
installed.
1. Install the selector lever cable into the selector lever cable bracket.
2. Connect the selector lever cable end onto the manual control lever and lock the lock tab.