Explorer 4WD V8-4.6L (2008)
Drive/Propeller Shaft: Service and Repair
Driveshaft - Rear, One-Piece
Driveshaft - Rear, One-Piece, Four Wheel Drive (4WD)
Driveshaft - Rear, One-Piece, Four Wheel Drive (4WD)
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. If equipped, remove the skid plate.
3. Index-mark the driveshaft flange to the transfer case rear output flange to maintain driveshaft balance.
4. Index-mark the driveshaft flange to the pinion flange to maintain driveshaft balance.