ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Drivetrain - Rear Axle Squealing Noise|Page 5498 > < Drivetrain - Rear Axle Squealing Noise|Page 5496
Page 11
background image

Claimed With A (Do Not
Use With 4139A, 4139A2)

081903E

2002-2005 Explorer,

1.5 Hrs.

Mountaineer: Replace Rear
Axle Stub Shaft Seal.
Includes Time To Remove
and Install Halfshaft. Both
Sides. This Labor
Operation Can Be Claimed
With A (Do Not Use With
4139A, 4139A2)

081903E

2003-2005 Aviator:

1.6 Hrs.

Replace Rear Axle Stub
Shaft Seal. Includes Time
To Remove and Install
Halfshaft. Both Sides. This
Labor Operation Can Be
Claimed With A (Do Not
Use With 4139A, 4139A2)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

4A109

42

Disclaimer

Technical Service Bulletin # 08-19-6

Date: 080929

Drivetrain - Rear Axle Squealing Noise

TSB 08-19-6

09/29/08

HIGH PITCHED SQUEAL NOISE FROM THE REAR 
AXLE AREA - BUILT ON OR BEFORE 7/28/2008

FORD:
2006-2008 Explorer
2007-2008 Explorer Sport Trac

MERCURY:
2006-2008 Mountaineer

ISSUE
Some 2006-2008 Explorer, Mountaineer and 2007-2008 Sport Trac vehicles built on or before 7/28/2008 may exhibit a high pitched squeal noise from
the rear axle area while driving at low speeds. This may be caused by the rear outer axle halfshaft dust seals contacting the knuckle surface.

ACTION
Follow the Service Procedure steps to correct the condition.

SERVICE PROCEDURE

1.

Position vehicle on a hoist and place it in neutral.

2.

Remove the rear wheel and tire. For additional information, refer to Workshop Manual (WSM), Section 204-04.

Drivetrain - Rear Axle Squealing Noise|Page 5498 > < Drivetrain - Rear Axle Squealing Noise|Page 5496