Explorer 4WD V8-4.6L SOHC VIN W (2004)
11. Position the RH C-pillar trim panel.
1
With the book aligned to the sheet metal, position the top of the C-pillar trim panel to the sheet metal.
-
Make sure the safety belt shoulder height adjuster and the C-pillar trim panel sliding insert are at their most upward position of travel to aid
installation.
2
Align and slide down, engaging the front upper trim panel retainer.
-
The C-pillar trim panel sliding insert circular recess must align to the safety belt guide bolt.
3
Align and push in, engaging the front lower trim panel retainer.
12. Push in, seating the retainers.
-
After the C-pillar trim panel is reinstalled, make sure the safety belt shoulder height adjuster button activation and the vertical movement of the
trim panel sliding insert is smooth.
All vehicles