Explorer 4WD V8-4.6L SOHC VIN W (2004)
1. CAUTION: Do not allow the inner halfshaft boots to contact the lower control arms. Damage to the boots can occur.
Support the axle using an appropriate jack. Lower the axle approximately 150 mm (6 inch).
Item 7: LH Engine Support Insulator Removal Note
1. Install the special tools.
2. Raise the engine until the insulator can be removed.
Item 8: RH Engine Support Insulator Removal Note
1. Install the special tools.
2. Raise the engine until the insulator can be removed.
Item 6: Front Axle Bolts Installation Note
1. Raise the front axle into position and loosely install the bolts. Remove the jack.
