Explorer 4WD V8-4.6L SOHC VIN W (2004)
To remove individual parts, only carry out the listed steins:
6. To install, reverse the removal procedure.
7. Install the front axle, if equipped.
8. Install the stabilizer bar, if equipped.
9. Fill the engine with clean engine oil.
10. If the oil pump was removed, install the timing chains.
Items 1-3: Oil Pan Bolts, Oil Pan and Oil Pan Gasket Installation Note
1. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs, or other abrasive means to clean the sealing surfaces. These may
cause scratches and gouges resulting in leak paths. Use a plastic scraper to clean the sealing surfaces.
