Explorer 4WD V8-4.6L SOHC VIN W (2004)
2. Remove the parts in the order indicated in the illustration and table. To remove individual parts, only carry out the listed steps.
Item 1: Starter Solenoid Terminals Protective Cap Removal Note
1. Raise and support the vehicle.
Item 12: Battery Cable Bracket And Engine Ground Cable Nuts Removal Note
1. Lower the vehicle.
Item 18: Generator B+ Terminal Nut Removal Note
1. Position the generator B+ terminal protective cover aside.
Item 23: Battery Junction Box Nut Removal Note
1. Open the battery junction box cover to access the battery junction box nut.
INSTALLATION
1. To install, reverse the removal procedure.