Explorer 4WD V8-4.6L VIN W (2002)
Trunk / Liftgate Latch: Service and Repair
Liftgate Latch
LIFTGATE LATCH
Removal and Installation
1. Remove the liftgate trim panel.
2. Remove the watershield.
3. Remove the bolts and the liftgate latch.
-
Discard the bolts.
4. Disconnect the liftgate ajar switch electrical connector.
5. Disconnect the release cable.
1. Disconnect the cable conduit.
2. Disconnect the cable.
6. To install, reverse the removal procedure.
-
Transfer parts as necessary.