Explorer 4WD V8-4.6L VIN W (2002)
5. Detach the harness from the retainers.
6. Remove the wheel speed sensor.
1. Remove the bolt.
2. Remove the wheel speed sensor.
7. NOTE: Plug the sensor mount opening, thoroughly clean the anti-lock brake sensor mounting surface and apply grease to the anti-lock brake
sensor mounting surface.
To install, reverse the removal procedure.
^
Apply anti-seize lubricant to the hub mounting surface. Use brake parts cleaner to clean the brake disc.
^
When installing the brake disc on the hub, reference the matchmarks made during the removal procedure.