Explorer 4WD V8-4.6L VIN W (2002)
Brake Pad: Customer Safety Information
CAUTION: Install a new pad if worn to or past the specified thickness above the metal backing plate. Install new pads in complete axle sets.
CAUTION: Do not allow the brake caliper to hang by the flexible brake hose.
CAUTION: Do not allow grease, oil, brake fluid or other contaminants to contact the brake pads.
CAUTION: Use a hub-mount brake lathe, if necessary, to machine the rear brake disc.
Clean the slipper mating surface. Apply 0.03g of Silicone Gasket and Sealant F7AZ-19554-EA or equivalent meeting Ford specification
WSE-M4G323-A4 to the slipper mating surface. Install the new slippers.
CAUTION: Install new brake pads in full axle sets. Do not install new brake pads on only one side of vehicle.