Explorer 4WD V8-4.6L VIN W (2002)
4. Remove the screws and remove the manual climate control assembly.
-
Remove the function selector switch if needed.
-
Remove the blower motor switch if needed.
INSTALLATION
1. To install, reverse the removal procedure.
Dual Automatic Temperature Control
REMOVAL
1. Remove the instrument panel center finish panel.
1
Carefully pry and disengage the retaining clips.
2
Working around the perimeter of the finish panel, disengage the remaining retaining clips.
-
Disconnect the electrical connectors and remove the instrument panel center finish panel.
CAUTION: Use a shop cloth or equivalent to prevent damage to the instrument panel when prying the instrument panel center finish panel.
2. Remove the DATC module.
1
Remove the screws.
2
Remove the DATC module.
INSTALLATION
1. To install, reverse the removal procedure.
Function Selector Switch
REMOVAL
1. Remove the manual climate control assembly.
2. Pull and remove the function selector knob.