Explorer 4WD V8-4.6L VIN W (2002)
8. Remove the two steering wheel back cover plugs (one shown).
9. Remove the two driver air bag module bolts (one shown).
Vehicles built up to 03/2002
10. Remove the driver air bag module.
1. Slide and disengage the driver air bag module electrical connector locking clip.
2. Push in on the two release tabs and disconnect the driver air bag module electrical connector.
3. Disconnect the horn switch electrical connector.
4. Remove the driver air bag module.
11. Attach the restraint system diagnostic tool to the clockspring electrical connector at the top of the steering column.
Vehicles built 03/2002 onward
12. Remove the driver air bag module.
