Explorer 4WD V8-4.6L VIN W (2002)
29. Remove the LH C-pillar trim panel.
1. Pull out and release the retaining clips.
2. Pull out and release the retainer.
3. Lower the door opening weatherstrip, slide the C-pillar trim panel up, releasing the retainers and remove the C-pillar trim panel.
Vehicles with side air curtains or safety canopies
30. Disconnect the LH side air curtain/safety canopy electrical connector.
31. Attach the restraint system diagnostic tool to the vehicle harness side of the LH side air curtain/safety canopy electrical connector.
Vehicles built up to 03/2002
32. Install the RCM fuse F2.28 (1OA) to the CJB.
Vehicles built 03/2002 onward
33. Install the RCM fuse F2.19 (10A to the(CJB).
All vehicles
34. Connect the battery ground cable.
Reactivation Procedure
Reactivation
WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, and notes at the beginning of the
deactivation procedure.
Vehicles built up to 03/2002
