Explorer 4WD V8-4.6L VIN W (2002)
Alignment: Service and Repair
Camber and Caster Adjustment
Camber Adjustment-Rear
Camber Adjustment-Rear
1. NOTE: The lower arm rearward mounting bolt has a set shim that must be removed and replaced with a washer to allow for the adjustment of the
arm in the frame slot.
Remove the nut and the set shim.
^
Discard the nut and set shim.
-
Install the washer and the nut and snug the nut.
2. NOTE: A prybar may be used between the lower arm and the frame pocket to aid in moving the arm outward.
To decrease the camber, move the lower arm outward.
3. NOTE: Adjustable pliers may be used to aid in moving the arm inward.
To increase the camber, move the lower arm inward.
